| Enhetstyp | Modbus TCP (Ethernet) | RS485 | Effektbegränsning | Lägsta firmwareversion |
|---|---|---|---|---|
| SolarEdge SE2200H | ✅ | ✅ | 🔶 (see warning below) | v3.0 (Tip: if the SolarEdge SetApp works, the firmware will be recent enough) |
| SolarEdge SE3000H | ||||
| SolarEdge SE3500H | ||||
| SolarEdge SE3680H | ||||
| SolarEdge SE4000H | ||||
| SolarEdge SE5000H | ||||
| SolarEdge SE6000H |
If curtailment is not working on your SolarEdge device, it is probably not enabled by SolarEdge. Reach out to SolarEdge to enable control of your devices. [!WARNING] SolarEdge refuses to help customers with curtailment!
For correct ethernet wiring: Follow the the guidelines for ethernet wiring.
In the menu, navigate to "Communication" -> "LAN Conf" -> "Modbus TCP", and activate Modbus TCP.
When Modbus TCP is activated, the following status screen will be displayed:
Modbus TCP: <status>
IP:192.168.1.210
Port:502